Product Selector

52 Results Found

Knucklehead® (Alkaline Model)
  • Engineered optics feature dual parabolic reflectors within a larger textured reflector optimizing light on target in conjunction with an overall smooth flood pattern
  • Shockproof dual C4® premium LED technology delivers 200 lumens
  • Features a 210 degree articulating head that rotates a full 360 degrees
  • 4 modes:
    High – 1150 candela peak beam intensity, 200 Lumens, 3.5 hour runtime
    Low – 350 candela peak beam intensity, 63 lumens, 16 hour runtime
    Moonlight – 20 day runtime
    Flash – 8 hour runtime


    Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
    • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
    • Features a 210 degree articulating head that rotates a full 360 degrees
    • 4 lighting modes
    • Optimized electronics provide regulated intensity


    Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
    • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
    • Features a 210 degree articulating head that rotates a full 360 degrees
    • 4 lighting modes
    • Optimized electronics provide regulated intensity


    Knucklehead® with Clip (Alkaline Model)
    • Engineered optics feature dual parabolic reflectors within a larger textured reflector optimizing light on target in conjunction with an overall smooth flood pattern
    • Shockproof dual C4® premium LED technology delivers 200 lumens
    • Durable spring-loaded clip for easy attachment to turnout gear and uneven surfaces
    • Features a 210 degree articulating head that rotates a full 360 degrees


      2AA ProPolymer® LED
      • Powered by 2 "AA" alkaline batteries
      • One (1) 0.5 Watt High-Flux LED, 30,000 hour lifetime in parabolic reflector module.
      • 20 Lumens typical. Parabolic reflector produces a focused beam with optimum peripheral illumination.


        2AA ProPolymer® Xenon
        • Powered by 2 "AA" alkaline batteries
        • Xenon gas-filled bi-pin bulb
        • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


        3C ProPolymer® LED
        • Powered by 3 "C" alkaline batteries
        • 10 ultra-bright 100,000-hour life LEDs
        • 85 lumens typical with 10 white LEDs, blue LEDs also available


          3C ProPolymer® Xenon
          • Powered by 3 "C" alkaline batteries
          • 785 mA xenon gas-filled module
          • Up to 16,000 Candela (peak beam intensity), 50 lumens (typical)


            4AA ProPolymax®
            • TEN-TAP® programmable switch allows user selection of one of three different programs:
              • high/low/strobe (factory default)
              • high only
              • low/high 
            • C4® LED output:
              • High: 300 lumens; 17,000 candela; runs 2.75 hours
              • Low: 50 lumens; 2,500 candela; runs 24 hours
              • Strobe runs 6 hours
            • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents


            4AA ProPolymer® LED
            • Powered by 4 "AA" alkaline batteries
            • 7 ultra-bright 100,000-hour life LEDs
            • 67 lumens typical with 7 white LEDs, blue LEDs also available


              4AA ProPolymer® Lux Div 1
              • C4® LED technology, with a 50,000 hour lifetime.
              • Unbreakable polycarbonate lens with scratch-resistant coating.
              • 100 lumens typical; up to 4,200 candela peak beam intensity.


                4AA ProPolymer® Lux Div 2
                • C4® LED technology, with a 50,000 hour lifetime.
                • Unbreakable polycarbonate lens with scratch-resistant coating.
                • 100 lumens typical; up to 4,200 candela peak beam intensity.


                  4AA ProPolymer® Xenon
                  • Powered by 4 "AA" alkaline batteries
                  • Features a xenon gas-filled module
                  • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


                    2AA ProPolymer® LED
                    • ATEX-approved for Category 3 (Zone 2) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum operating temperature of <100°C.
                    • .5w super-bright, high-flux 30,000-hour life LED delivers 25 lumens; 2,300 candela; runs 18 hours
                    • Powered by two "AA" alkaline batteries (included)
                    • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
                    • IP57 rated design; dust and water ingress protected


                    2AA ProPolymer® Xenon
                    • ATEX-approved for Category 2 (Zone 1) locations. For use in places where an explosive gas atmosphere (other than mines susceptible to firedamp) is likely to occur in normal operation occasionally. It has a maximum operating temperature of <100°C.
                    • Xenon gas-filled bi-pin bulb delivers 4,500 candela; 9 lumens; runs 4 hours
                    • Powered by two "AA" alkaline batteries (included)
                    • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
                    • IP57 rated design; dust and water ingress protected


                    3C ProPolymer® LED
                    • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
                    • 10 ultra-bright white 100,000-hour life LEDs deliver 54 lumens; runs 336 hours
                    • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
                    • Waterproof/Dustproof IP65


                    3C ProPolymer® Xenon
                    • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum surface temperature of <135°C.
                    • Xenon gas-filled bulb delivers 50 lumens;16,000 candela; runs 5.5 hours
                    • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
                    • Waterproof/Dustproof IP65


                    4AA ProPolymer® LED
                    • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
                    • 7 ultra-bright white 100,000-hour life LEDs deliver 47 lumens; runs 155 hours
                    • Powered by four "AA" alkaline batteries (included)
                    • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
                    • Push-button tail switch for momentary or constant “on”
                    • Waterproof/Dustproof IP65


                    4AA ProPolymer® LUX
                    • ATEX-approved for Category 2 (Zones 1, 21) locations.  For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
                    • C4® LED delivers 100 lumens; 4,200 candela; 130 meter beam distance; runs 6 hours
                    • Non-conductive, anti-static, impact-resistant polymer construction with rubber facecap for shock resistance; corrosion proof; unbreakable polycarbonate lens with scratch-resistant coating
                    • Uses four "AA" alkaline batteries (included)
                    • IP67; waterproof to 1 meter for 30 minutes


                    4AA ProPolymer® Xenon
                    • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum operating temperature of <135°C.
                    • Xenon gas-filled bulb delivers  34 lumens;11,000 candela; runs 4 hours
                    • Powered by four "AA" alkaline batteries
                    • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
                    • Push-button tail switch for momentary or constant “on”
                    • Waterproof/Dustproof IP65


                    Survivor® LED (Alkaline Model)
                    • ATEX-approved for Category 2 (Zone 1) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
                    • Available in rechargeable and alkaline models
                    • Features C4® LED technology with four lighting modes
                    • High-impact super-tough nylon construction offers exceptional durability; O-ring sealed, unbreakable polycarbonate lens with silicone anti-scratch coating is assembled in a heavy-duty bezel
                    • IP54 water-resistant; 2 meter impact resistance tested


                    2AA ProPolymer® Xenon
                    • Powered by 2 "AA" alkaline batteries
                    • Xenon gas-filled bi-pin bulb
                    • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


                    3C ProPolymer® LED
                    • Powered by 3 "C" alkaline batteries
                    • 10 ultra-bright 100,000-hour life LEDs
                    • 85 lumens typical with 10 white LEDs, blue LEDs also available


                      3C ProPolymer® Xenon
                      • Powered by 3 "C" alkaline batteries
                      • 785 mA xenon gas-filled module
                      • Up to 16,000 Candela (peak beam intensity), 50 lumens (typical)


                        4AA ProPolymer® LED
                        • Powered by 4 "AA" alkaline batteries
                        • 7 ultra-bright 100,000-hour life LEDs
                        • 67 lumens typical with 7 white LEDs, blue LEDs also available


                          4AA ProPolymer® Lux Div 1
                          • C4® LED technology, with a 50,000 hour lifetime.
                          • Unbreakable polycarbonate lens with scratch-resistant coating.
                          • 100 lumens typical; up to 4,200 candela peak beam intensity.


                            4AA ProPolymer® Xenon
                            • Powered by 4 "AA" alkaline batteries
                            • Features a xenon gas-filled module
                            • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


                              Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
                              • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                              • Features a 210 degree articulating head that rotates a full 360 degrees
                              • 4 lighting modes
                              • Optimized electronics provide regulated intensity


                              Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
                              • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                              • Features a 210 degree articulating head that rotates a full 360 degrees
                              • 4 lighting modes
                              • Optimized electronics provide regulated intensity


                              Fire Vulcan®
                              • ATEX-approved for Category 3 (Zones 2 and 22) locations. For use in places with an explosive atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum surface temperature of <135°C Gas, 53°C Dust.
                              • Features high-intensity xenon bi-pin bulb and two ultra-bright blue taillight LEDs
                              • Xenon bulb delivers 50 lumens; 31,000 candela
                              • Strobe and Steady Modes
                              • 6V 4.5 amp-hour rechargeable battery can be recharged up to 500 times
                              • Waterproof/Dustproof IP66


                              Fire Vulcan® Vehicle Mount System
                              • ATEX-approved for Category 3 (Zones 2 and 22) locations. For use in places with an explosive atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum surface temperature of <135°C Gas, 53°C Dust.
                              • Features high-intensity xenon bi-pin bulb and two ultra-bright blue taillight LEDs
                              • Xenon bulb delivers 50 lumens; 31,000 candela
                              • Strobe and Steady Modes
                              • 6V 4.5 amp-hour rechargeable battery can be recharged up to 500 times
                              • Waterproof/Dustproof IP66


                              Vulcan®
                              • ATEX-approved for Category 3 (Zones 2 and 22) locations. For use in places with an explosive atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum surface temperature of <135°C Gas, 53°C Dust.
                              • High-intensity 3 watt spot xenon bulb provides 50 lumens; 31,000 candela; runs 13 hours
                              • Zero-maintenance 4.5 amp-hour sealed lead acid battery is rechargeable up to 500 times
                              • Features a three-position toggle switch for easy use with gloves
                              • High-impact ABS thermoplastic housing with rubberized cushioned grip handle
                              • Waterproof/Dustproof IP66


                              Vulcan® Dual Filament System
                              • ATEX-approved for Category 3 (Zones 2 and 22) locations. For use in places with an explosive atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum surface temperature of <450°C Gas, 62°C Dust.
                              • Xenon dual filament 8 watt safety bulb delivers instant backup beam has up to 157 lumens,, 70,000 candela each; runs 3.25 hours
                              • Zero-maintenance 4.5 amp-hour sealed lead acid battery is rechargeable up to 500 times
                              • Features a three-position toggle switch for easy use with gloves
                              • High-impact ABS thermoplastic housing with rubberized cushioned grip handle
                              • Waterproof/Dustproof IP66


                              Vulcan® Vehicle Mount System
                              • ATEX-approved for Category 3 (Zones 2 and 22) locations. For use in places with an explosive atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum surface temperature of <135°C Gas, 53°C Dust.
                              • High-intensity 3 watt spot xenon bulb or 8 watt spot xenon dual filament safety bulb that delivers instant backup beam
                                • 3 watt spot provides 50 lumens; 31,000 candela; runs 13 hours
                                • Each Dual filament 8 watt spot provides 157 lumens; 70,000 candela each; runs 3.25 hours
                              • Features a three-position toggle switch for easy use with gloves
                              • Zero-maintenance 4.5 amp-hour sealed lead acid battery is rechargeable up to 500 times
                              • High-impact ABS thermoplastic housing with rubberized cushioned grip handle
                              • Waterproof/Dustproof IP66


                              Fire Vulcan®
                              • High-intensity halogen 8 watt spot bi-pin bulb and two ultra-bright blue LEDs
                              • Strobe and Steady Modes
                              • Up to 80,000 candela (peak beam intensity) with halogen bulb


                                Fire Vulcan® LED
                                • C4® LED, impervious to shock with a 50,000 hr lifetime
                                • Light Output:
                                  • High: 80,000 candela peak beam intensity; 145 lumens; 566m beam distance; runs 3 hours
                                  • Low: 40,000 candela peak beam intensity; 70 lumens; runs 6 hours
                                • Deep-dish parabolic reflector produces a tight beam with optimum peripheral illumination to aid in navigation; Optimized electronics provide regulated intensity
                                • Ultra-bright blue taillight LEDs make certain you can be seen even in thick smoke
                                • 8 programmable switch functions


                                Fire Vulcan® Vehicle Mount System
                                • High-intensity halogen 8 watt spot bi-pin bulb and two ultra-bright blue LEDs
                                • Strobe and Steady Modes
                                • Up to 80,000 candela (peak beam intensity) with halogen bulb


                                  Survivor® LED
                                  • Available in rechargeable and alkaline models
                                  • Features C4® LED technology with four lighting modes
                                  • Deep-dish parabolic reflector produces narrow beam; ideal for smoke-cutting applications. Optimum peripheral illumination to aid in navigation
                                  • Spring loaded clip with built-in ring easily attaches to belts and harnesses.


                                  Knucklehead® HAZ-LO® – Flood Model
                                  • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                                  • Features a 210 degree articulating head that rotates a full 360 degrees
                                  • 4 lighting modes
                                  • Optimized electronics provide regulated intensity


                                  Knucklehead® HAZ-LO® – Spot Model
                                  • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                                  • Features a 210 degree articulating head that rotates a full 360 degrees
                                  • 4 lighting modes
                                  • Optimized electronics provide regulated intensity


                                  Polystinger® LED HAZ-LO®
                                  • Shockproof C4® LED Technology delivers 15,000 candela peak beam intensity.
                                  • 3 modes:
                                    High – 15,000 candela peak beam intensity, 130 Lumens, 4 hour runtime
                                    Low – 5700 candela peak beam intensity, 50 Lumens, 12 hour runtime
                                    Moonlight Mode – 120 candela peak beam intensity, 1.3 Lumens, 20 Day runtime
                                  • Super-tough, non-conductive chemical and corrosion-resistant nylon polymer. Developed for petrochemical and heavy industrial applications with hazardous atmospheres


                                    Knucklehead®
                                    • Engineered optics feature dual parabolic reflectors within a larger textured reflector optimizing light on target in conjunction with an overall smooth flood pattern
                                    • Shockproof dual C4® premium LED technology delivers 200 lumens
                                    • Features a 210 degree articulating head that rotates a full 360 degrees
                                    • 4 modes:
                                      High – 1150 candela peak beam intensity, 200 Lumens, 3.5 hour runtime
                                      Low – 350 candela peak beam intensity, 63 lumens, 16 hour runtime
                                      Moonlight – 20 day runtime
                                      Flash – 8 hour runtime


                                      Knucklehead® HAZ-LO® – Flood Model
                                      • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                                      • Features a 210 degree articulating head that rotates a full 360 degrees
                                      • 4 lighting modes
                                      • Optimized electronics provide regulated intensity


                                      Knucklehead® HAZ-LO® – Spot Model
                                      • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                                      • Features a 210 degree articulating head that rotates a full 360 degrees
                                      • 4 lighting modes
                                      • Optimized electronics provide regulated intensity


                                      Knucklehead® with Clip
                                      • Engineered optics feature dual parabolic reflectors within a larger textured reflector optimizing light on target in conjunction with an overall smooth flood pattern
                                      • Shockproof dual C4® premium LED technology delivers 200 lumens
                                      • Durable spring-loaded clip for easy attachment to turnout gear and uneven surfaces
                                      • Features a 210 degree articulating head that rotates a full 360 degrees


                                        PolyStinger®
                                        • Xenon gas-filled bi-pin bulb with 30-hour life; spare bulb in tailcap
                                        • Adjustable focus beam
                                        • Up to 11,000 candela (peak beam intensity); 90 lumens


                                          Polystinger® LED HAZ-LO®
                                          • Shockproof C4® LED Technology delivers 15,000 candela peak beam intensity.
                                          • 3 modes:
                                            High – 15,000 candela peak beam intensity, 130 Lumens, 4 hour runtime
                                            Low – 5700 candela peak beam intensity, 50 Lumens, 12 hour runtime
                                            Moonlight Mode – 120 candela peak beam intensity, 1.3 Lumens, 20 Day runtime
                                          • Super-tough, non-conductive chemical and corrosion-resistant nylon polymer. Developed for petrochemical and heavy industrial applications with hazardous atmospheres


                                            Stinger®
                                            • Xenon gas-filled bi-pin bulb; spare bulb in tailcap
                                            • Adjustable focus beam
                                            • Up to 11,000 candela (peak beam intensity); 90 lumens


                                              Survivor® LED
                                              • Available in rechargeable and alkaline models
                                              • Features C4® LED technology with four lighting modes
                                              • Deep-dish parabolic reflector produces narrow beam; ideal for smoke-cutting applications. Optimum peripheral illumination to aid in navigation
                                              • Spring loaded clip with built-in ring easily attaches to belts and harnesses.


                                              Vulcan®
                                              • High-intensity halogen bi-pin bulb
                                              • 8 watt spot provides up to 80,000 candela (peak beam intensity), 150 lumens typical
                                              • Up to 3.25 hrs. continuous run time per charge


                                                Vulcan® Dual Filament System
                                                • Xenon dual filament 8 watt safety bulb delivers instant backup beam
                                                • Dual filament 8 watt spot has up to 70,000 candela (peak beam intensity) each, 157 lumens typical
                                                • Up to 3.25 hrs. continuous run time per charge


                                                  Vulcan® Vehicle Mount System
                                                  • High-intensity halogen bi-pin bulb
                                                  • 8 watt spot provides up to 80,000 candela (peak beam intensity), 150 lumens typical
                                                  • Up to 3.25 hrs. continuous run time per charge

                                                     
                                                    ; Cache: False
                                                     Page:  Flush: