Product Selector

57 Results Found

Twin-Task® 3AA LED
  • C4® LED technology, with a 50,000 hour lifetime. Three ultra-bright white LEDs with 100,000 hour lifetime.
  • 2 modes:
    C4 LED – 2283 candela peak beam intensity, 100 Lumens, 5.75 hours runtime
    3 LED – 467 candela peak beam intensity, 33 Lumens, 34 hours runtime
  • IPX4 rated for water-resistant operation. All openings O-ring sealed. One meter impact resistance tested. Wrist lanyard.


    Twin-Task® 3AAA LASER LED
    • Pre-focused visible red Laser cartridge. C4® LED technology, with a 50,000 hour lifetime. Five ultra-bright white LEDs with 100,000 hour lifetime.
    • 2 modes:
      C4 LED – 2000 candela peak beam intensity, 100 Lumens, 2.75 hours runtime
      5 LED – 800 candela peak beam intensity, 68 Lumens, 5.25 hours runtime
    • Push-button sequences through four positions — Laser only, C4® LED, Laser/C4® LED combo, or five ultra-bright white LEDs.


      Task-Light® 3AA LED
      • Powered by 3 "AA" alkaline batteries
      • 1 watt C4® LED is 3 times brighter than a super high-flux LED – 95 lumens typical
      • Up to 16 hours run time


        Streamlight Jr.® LED
        • 1 watt C4® LED, 50,000-hr. LED
        • Up to 3800 candela (peak beam intensity) and 85 lumens measured system output
        • Runtime to the 10% output level:
          "AA" Alkaline Batteries – 4 Hours
          "AA" (L91) Lithium Batteries – 5.25 Hours


          Streamlight Jr.® Reach LED
          • Includes extension cable that allows for 14" of "reach"
          • Next generation C4® LED technology, impervious to shock with a 50,000 hour lifetime
          • Up to 1,600 candela peak central intensity and 85 lumens measured system output. Textured parabolic reflector produces an even, wide beam hotspot.
          • Up to 3.25 hours of run time to the 10% output level


            Survivor® LED (Alkaline Model)
            • Available in rechargeable and alkaline models
            • Features C4® LED technology with four lighting modes
            • Deep-dish parabolic reflector produces narrow beam; ideal for smoke-cutting applications. Optimum peripheral illumination to aid in navigation
            • Spring loaded clip with built-in ring easily attaches to belts and harnesses.


            Knucklehead® (Alkaline Model)
            • Engineered optics feature dual parabolic reflectors within a larger textured reflector optimizing light on target in conjunction with an overall smooth flood pattern
            • Shockproof dual C4® premium LED technology delivers 200 lumens
            • Features a 210 degree articulating head that rotates a full 360 degrees
            • 4 modes:
              High – 1150 candela peak beam intensity, 200 Lumens, 3.5 hour runtime
              Low – 350 candela peak beam intensity, 63 lumens, 16 hour runtime
              Moonlight – 20 day runtime
              Flash – 8 hour runtime


              Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
              • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
              • Features a 210 degree articulating head that rotates a full 360 degrees
              • 4 lighting modes
              • Optimized electronics provide regulated intensity


              Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
              • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
              • Features a 210 degree articulating head that rotates a full 360 degrees
              • 4 lighting modes
              • Optimized electronics provide regulated intensity


              Knucklehead® Spot (Alkaline Model)
              • Shockproof C4® premium LED technology combined with a deep dish parabolic reflector produces a focused beam for longer distances – 210 meters on high beam.
              • Durable spring-loaded clip for easy attachment to turnout gear and uneven surfaces
              • Features a 210 degree articulating head that rotates a full 360 degrees


                Knucklehead® with Clip (Alkaline Model)
                • Engineered optics feature dual parabolic reflectors within a larger textured reflector optimizing light on target in conjunction with an overall smooth flood pattern
                • Shockproof dual C4® premium LED technology delivers 200 lumens
                • Durable spring-loaded clip for easy attachment to turnout gear and uneven surfaces
                • Features a 210 degree articulating head that rotates a full 360 degrees


                  3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
                  • Kit includes:
                    • 3AA ProPolymer® HAZ-LO® with alkaline batteries
                    • Streamlight Helmet Mount
                    • Rubber Helmet Strap


                  ProTac® 1AA
                  • Features Ten-Tap® Programming – Choose from three user selectable programs:
                    1.) high/strobe/low (factory default)
                    2.) high only
                    3.) low/high
                  • C4® LED illumination output and run times:
                    HIGH - 70 lumens; 1,450 candela peak beam intensity; runs 2 hours
                    LOW – 5 lumens; 125 candela peak beam intensity;  runs 32 hours
                    STROBE – runs 4 hours
                  • Solid State power regulation provides maximum light output throughout battery life


                  ProTac® 2AA
                  • Features Ten-Tap® Programming – Choose from three user selectable programs:
                    1.) high/strobe/low (factory default)
                    2.) high only
                    3.) low/high
                  • C4® LED illumination output and run times:
                    HIGH - 155 lumens; 3,300 candela peak beam intensity; runs 2 hours
                    LOW - 11 lumens; 200 candela peak beam intensity;  runs 36 hours
                    STROBE – runs 4 hours
                  • Solid State power regulation provides maximum light output throughout battery life


                  ProTac® EMS
                  • C4 LED technology offers 3 levels of increasing intensities: Low, medium and high
                  • Powers on at low beam: 3.6 lumens/runs 36 hours; ideal for pupil exams. Faint peripheral illumination surrounding the focused beam slightly illuminates the opposite pupil without directly causing it to contract, facilitating observation of consensual contraction in dim light
                  • Two taps of the tail switch accesses medium mode, which delivers 10 lumens/runs for 19 hours. Ideal for non-glare wound examination
                  • Three taps of the tail switch accesses high mode, which delivers 50 lumens/runs 1.5 hours (1 AA alkaline); runs 3.4 hours using AA lithium battery


                    Sidewinder®
                    • Available in the following models and light configurations:
                      Military Model – White/Red/IR-IFF/Blue LEDs
                      Aviation Model – White/Green/IR-IFF/Blue LEDs
                      Sportsman Model – White/Red/Green/Blue LEDs
                    • C4® LED technology, white, impervious to shock with 50,000Hr lifetime.
                      5mm IR LED – 880 nm peak wavelength, impervious to shock with 100,000 hour lifetime
                      5mm Red LED – 630 nm peak wavelength, impervious to shock with 100,000 hour lifetime
                      5mm Blue LED – 470 nm peak wavelength, impervious to shock with 100,000 hour lifetime
                      5mm Green LED – 527 nm peak wavelength, impervious to shock with 100,000 hour lifetime
                    • Unbreakable polycarbonate lens with scratch-resistant coating. Gasket-sealed.
                    • Tactile indicator on rotary knob for IR LED position. (Green LED position for Sportsman model.)


                      2AA ProPolymer® HAZ-LO®
                      • C4® LED delivers 65 lumens; 2,300 candela; 96m beam distance; runs 24 hours
                      • Powered by 2 "AA" alkaline batteries (included)
                      • Smooth parabolic reflector produces a tight beam with optimum peripheral illumination
                      • Impact-resistant engineering polymer construction


                      2AA ProPolymer® LED
                      • Powered by 2 "AA" alkaline batteries
                      • One (1) 0.5 Watt High-Flux LED, 30,000 hour lifetime in parabolic reflector module.
                      • 20 Lumens typical. Parabolic reflector produces a focused beam with optimum peripheral illumination.


                        2AA ProPolymer® Xenon
                        • Powered by 2 "AA" alkaline batteries
                        • Xenon gas-filled bi-pin bulb
                        • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


                        3AA ProPolymer® HAZ-LO®
                        • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
                        • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
                        • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
                        • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


                          3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
                          • Kit includes:
                            • 3AA ProPolymer® HAZ-LO® with alkaline batteries
                            • Streamlight Helmet Mount
                            • Rubber Helmet Strap


                          4AA ProPolymax®
                          • TEN-TAP® programmable switch allows user selection of one of three different programs:
                            • high/low/strobe (factory default)
                            • high only
                            • low/high 
                          • C4® LED output:
                            • High: 300 lumens; 17,000 candela; runs 2.75 hours
                            • Low: 50 lumens; 2,500 candela; runs 24 hours
                            • Strobe runs 6 hours
                          • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents


                          4AA ProPolymer® LED
                          • Powered by 4 "AA" alkaline batteries
                          • 7 ultra-bright 100,000-hour life LEDs
                          • 67 lumens typical with 7 white LEDs, blue LEDs also available


                            4AA ProPolymer® Lux Div 1
                            • C4® LED technology, with a 50,000 hour lifetime.
                            • Unbreakable polycarbonate lens with scratch-resistant coating.
                            • 100 lumens typical; up to 4,200 candela peak beam intensity.


                              4AA ProPolymer® Lux Div 2
                              • C4® LED technology, with a 50,000 hour lifetime.
                              • Unbreakable polycarbonate lens with scratch-resistant coating.
                              • 100 lumens typical; up to 4,200 candela peak beam intensity.


                                4AA ProPolymer® Xenon
                                • Powered by 4 "AA" alkaline batteries
                                • Features a xenon gas-filled module
                                • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


                                  2AA ProPolymer® LED
                                  • ATEX-approved for Category 3 (Zone 2) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is not likely to occur in normal operation, but if it does, only occurs for short periods. It has a maximum operating temperature of <100°C.
                                  • .5w super-bright, high-flux 30,000-hour life LED delivers 25 lumens; 2,300 candela; runs 18 hours
                                  • Powered by two "AA" alkaline batteries (included)
                                  • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
                                  • IP57 rated design; dust and water ingress protected


                                  2AA ProPolymer® Xenon
                                  • ATEX-approved for Category 2 (Zone 1) locations. For use in places where an explosive gas atmosphere (other than mines susceptible to firedamp) is likely to occur in normal operation occasionally. It has a maximum operating temperature of <100°C.
                                  • Xenon gas-filled bi-pin bulb delivers 4,500 candela; 9 lumens; runs 4 hours
                                  • Powered by two "AA" alkaline batteries (included)
                                  • Non-conductive, high-impact, super-tough nylon polymer construction with rubber facecap for shock resistance
                                  • IP57 rated design; dust and water ingress protected


                                  3AA HAZ-LO
                                  • ATEX-approved for Category 1 (Zone 0) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum adverse surface temperature of <200°C.
                                  • RoHS compliant
                                  • C4® LED delivers 120 lumens; 6,800 candela; 165 meter beam distance, runs 11 hours
                                  • Parabolic reflector produces long range brilliance and smooth uniform beam pattern
                                  • Uses three "AA" alkaline batteries (included)
                                  • Push-button on/off switch easy to use even when wearing heavy gloves


                                  3AA ProPolymer® HAZ-LO®
                                  • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
                                  • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
                                  • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
                                  • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


                                    3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
                                    • Kit includes:
                                      • 3AA ProPolymer® HAZ-LO® with alkaline batteries
                                      • Streamlight Helmet Mount
                                      • Rubber Helmet Strap


                                    4AA ProPolymer® LED
                                    • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
                                    • 7 ultra-bright white 100,000-hour life LEDs deliver 47 lumens; runs 155 hours
                                    • Powered by four "AA" alkaline batteries (included)
                                    • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
                                    • Push-button tail switch for momentary or constant “on”
                                    • Waterproof/Dustproof IP65


                                    4AA ProPolymer® LUX
                                    • ATEX-approved for Category 2 (Zones 1, 21) locations.  For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
                                    • C4® LED delivers 100 lumens; 4,200 candela; 130 meter beam distance; runs 6 hours
                                    • Non-conductive, anti-static, impact-resistant polymer construction with rubber facecap for shock resistance; corrosion proof; unbreakable polycarbonate lens with scratch-resistant coating
                                    • Uses four "AA" alkaline batteries (included)
                                    • IP67; waterproof to 1 meter for 30 minutes


                                    4AA ProPolymer® Xenon
                                    • ATEX-approved for Category 2 (Zones 1, 21) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum operating temperature of <135°C.
                                    • Xenon gas-filled bulb delivers  34 lumens;11,000 candela; runs 4 hours
                                    • Powered by four "AA" alkaline batteries
                                    • Anti-static, impact-resistant polymer construction with rubber facecap for shock resistance
                                    • Push-button tail switch for momentary or constant “on”
                                    • Waterproof/Dustproof IP65


                                    Survivor® LED (Alkaline Model)
                                    • ATEX-approved for Category 2 (Zone 1) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
                                    • Available in rechargeable and alkaline models
                                    • Features C4® LED technology with four lighting modes
                                    • High-impact super-tough nylon construction offers exceptional durability; O-ring sealed, unbreakable polycarbonate lens with silicone anti-scratch coating is assembled in a heavy-duty bezel
                                    • IP54 water-resistant; 2 meter impact resistance tested


                                    2AA ProPolymer® HAZ-LO®
                                    • C4® LED delivers 65 lumens; 2,300 candela; 96m beam distance; runs 24 hours
                                    • Powered by 2 "AA" alkaline batteries (included)
                                    • Smooth parabolic reflector produces a tight beam with optimum peripheral illumination
                                    • Impact-resistant engineering polymer construction


                                    2AA ProPolymer® Xenon
                                    • Powered by 2 "AA" alkaline batteries
                                    • Xenon gas-filled bi-pin bulb
                                    • Up to 4,000 Candela (peak beam intensity), 10 lumens (typical)


                                    3AA HAZ-LO® LED Headlamp
                                    • C4® LED technology, impervious to shock with a 50,000 hour lifetime.
                                    • 120 lumens measured system output, 6,800 candela peak beam intensity, and 165 meter beam distance, runs 11 hours
                                    • Push-button on/off switch easy to use even when wearing heavy gloves
                                    • Intrinsically safe – Class I, Div 1


                                      3AA ProPolymer® HAZ-LO®
                                      • High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
                                      • "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
                                      • Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
                                      • C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours


                                        3AA ProPolymer® HAZ-LO® Helmet Lighting Kit
                                        • Kit includes:
                                          • 3AA ProPolymer® HAZ-LO® with alkaline batteries
                                          • Streamlight Helmet Mount
                                          • Rubber Helmet Strap


                                        4AA ProPolymer® LED
                                        • Powered by 4 "AA" alkaline batteries
                                        • 7 ultra-bright 100,000-hour life LEDs
                                        • 67 lumens typical with 7 white LEDs, blue LEDs also available


                                          4AA ProPolymer® Lux Div 1
                                          • C4® LED technology, with a 50,000 hour lifetime.
                                          • Unbreakable polycarbonate lens with scratch-resistant coating.
                                          • 100 lumens typical; up to 4,200 candela peak beam intensity.


                                            4AA ProPolymer® Xenon
                                            • Powered by 4 "AA" alkaline batteries
                                            • Features a xenon gas-filled module
                                            • Up to 11,000 Candela (peak beam intensity), 34 lumens (typical)


                                              Knucklehead® HAZ-LO® – Flood Model (Alkaline Model)
                                              • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                                              • Features a 210 degree articulating head that rotates a full 360 degrees
                                              • 4 lighting modes
                                              • Optimized electronics provide regulated intensity


                                              Knucklehead® HAZ-LO® – Spot Model (Alkaline Model)
                                              • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                                              • Features a 210 degree articulating head that rotates a full 360 degrees
                                              • 4 lighting modes
                                              • Optimized electronics provide regulated intensity


                                              Survivor® LED (Alkaline Model)
                                              • Available in rechargeable and alkaline models
                                              • Features C4® LED technology with four lighting modes
                                              • Deep-dish parabolic reflector produces narrow beam; ideal for smoke-cutting applications. Optimum peripheral illumination to aid in navigation
                                              • Spring loaded clip with built-in ring easily attaches to belts and harnesses.


                                              3AA HAZ-LO® LED Headlamp
                                              • C4® LED technology, impervious to shock with a 50,000 hour lifetime.
                                              • 120 lumens measured system output, 6,800 candela peak beam intensity, and 165 meter beam distance, runs 11 hours
                                              • Push-button on/off switch easy to use even when wearing heavy gloves
                                              • Intrinsically safe – Class I, Div 1


                                                Survivor® LED
                                                • ATEX-approved for Category 2 (Zone 1) locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is likely to occur in normal operation occasionally. It has a maximum adverse surface temperature of <135°C.
                                                • Available in rechargeable and alkaline models
                                                • Features C4® LED technology with four lighting modes
                                                • Deep-dish parabolic reflector produces narrow beam; ideal for smoke-cutting applications.
                                                • Industrial rechargeable NiCd battery can be recharged up to 1,000 times. Also accepts four "AA" alkaline non-rechargeable batteries for fast replacement with readily available batterie
                                                • High-impact super-tough nylon construction offers exceptional durability; O-ring sealed, unbreakable polycarbonate lens with silicone anti-scratch coating is assembled in a heavy-duty bezel
                                                • IP54 water-resistant; 2 meter impact resistance tested


                                                Survivor® LED
                                                • Available in rechargeable and alkaline models
                                                • Features C4® LED technology with four lighting modes
                                                • Deep-dish parabolic reflector produces narrow beam; ideal for smoke-cutting applications. Optimum peripheral illumination to aid in navigation
                                                • Spring loaded clip with built-in ring easily attaches to belts and harnesses.


                                                Knucklehead® HAZ-LO® – Flood Model
                                                • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                                                • Features a 210 degree articulating head that rotates a full 360 degrees
                                                • 4 lighting modes
                                                • Optimized electronics provide regulated intensity


                                                Knucklehead® HAZ-LO® – Spot Model
                                                • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                                                • Features a 210 degree articulating head that rotates a full 360 degrees
                                                • 4 lighting modes
                                                • Optimized electronics provide regulated intensity


                                                Knucklehead®
                                                • Engineered optics feature dual parabolic reflectors within a larger textured reflector optimizing light on target in conjunction with an overall smooth flood pattern
                                                • Shockproof dual C4® premium LED technology delivers 200 lumens
                                                • Features a 210 degree articulating head that rotates a full 360 degrees
                                                • 4 modes:
                                                  High – 1150 candela peak beam intensity, 200 Lumens, 3.5 hour runtime
                                                  Low – 350 candela peak beam intensity, 63 lumens, 16 hour runtime
                                                  Moonlight – 20 day runtime
                                                  Flash – 8 hour runtime


                                                  Knucklehead® HAZ-LO® – Flood Model
                                                  • Features 2 C4® LEDs within an engineered reflector that produce a smooth flood beam to illuminate your work area
                                                  • Features a 210 degree articulating head that rotates a full 360 degrees
                                                  • 4 lighting modes
                                                  • Optimized electronics provide regulated intensity


                                                  Knucklehead® HAZ-LO® – Spot Model
                                                  • Single C4® LED parabolic reflector provides a tight beam for longer range target illumination
                                                  • Features a 210 degree articulating head that rotates a full 360 degrees
                                                  • 4 lighting modes
                                                  • Optimized electronics provide regulated intensity


                                                  Knucklehead® Spot
                                                  • Shockproof C4® premium LED technology combined with a deep dish parabolic reflector produces a focused beam for longer distances – 210 meters on high beam.
                                                  • Durable spring-loaded clip for easy attachment to turnout gear and uneven surfaces
                                                  • Features a 210 degree articulating head that rotates a full 360 degrees


                                                    Knucklehead® with Clip
                                                    • Engineered optics feature dual parabolic reflectors within a larger textured reflector optimizing light on target in conjunction with an overall smooth flood pattern
                                                    • Shockproof dual C4® premium LED technology delivers 200 lumens
                                                    • Durable spring-loaded clip for easy attachment to turnout gear and uneven surfaces
                                                    • Features a 210 degree articulating head that rotates a full 360 degrees


                                                      Survivor® LED
                                                      • Available in rechargeable and alkaline models
                                                      • Features C4® LED technology with four lighting modes
                                                      • Deep-dish parabolic reflector produces narrow beam; ideal for smoke-cutting applications. Optimum peripheral illumination to aid in navigation
                                                      • Spring loaded clip with built-in ring easily attaches to belts and harnesses.

                                                       
                                                      ; Cache: False
                                                       Page:  Flush: